BE Power 2,500 PSI 3.5 GPM 5.0 HP Hot Water Pressure Washer with Baldor Motor and AR Triplex Pump - HW255E3CNG

BE Power 2,500 PSI 3.5 GPM Hot Water Pressure Washer – HW255E3CNG

The BE Power HW255E3CNG 2,500 PSI 3.5 GPM Hot Water Pressure Washer is a natural gas fired, three phase electric unit designed for indoor wash bays, garages, and commercial facilities. A 5.0 HP Baldor three phase motor and a commercial AR triplex pump deliver reliable cleaning performance, while the natural gas burner and heavy duty heating coil provide hot water up to 200°F (about 93°C) for effective degreasing and sanitation.

With an auto start/stop system, external unloader, and industrial grade accessories, this unit is ideal for fixed installations where consistent, high performance hot water cleaning is required.

Key Features & Benefits

• 5.0 HP Three Phase Baldor Motor
  Commercial Baldor motor is built for energy efficiency, reliability, and long duty cycles in demanding wash bay and industrial applications.

• Natural Gas Fired System
  Plumbs directly into a natural gas system using a Robertshaw valve, making it well suited for permanent indoor wash bays, garages, and facilities with existing gas service.

• Commercial Grade AR Triplex Pump
  AR triplex pump features a reinforced body, forged brass manifold, solid ceramic plungers, stainless steel check valves, and a thermal release valve for performance and durability under hot water use.

• Auto Start/Stop Control
  Auto start/stop system activates the pump when the trigger on the spray wand is squeezed and stops it when released, helping reduce wear, noise, and energy consumption between cleaning tasks.

• External Unloader for Cooling and Versatility
  External unloader provides superior cooling and flexibility in pressure adjustment, enhancing pump life in continuous or high duty use.

• Heavy Duty Heating Coil Construction
  Heating coil uses heavy duty 1/2 inch schedule 80 carbon steel cold rolled pipe, protected by a stainless steel wrap for durability and corrosion resistance.

• Adjustable Thermostat and Burner Control
  Burner can be turned off when hot water is not needed and is controlled by an adjustable thermostat that can be set up to approximately 93°C / 200°F, allowing you to tailor water temperature to the application.

• Industrial Grade Accessories Included
  Comes with a 50 ft high pressure hose, spray gun and wand assembly, and five spray nozzles so the system can be put into service quickly after installation.

• Fixed Installation Ready
  Designed as a stationary hot water pressure washer, ideal for indoor bays where plumbing and electrical are permanently installed.

Specifications

Performance

• Pressure: 2,500 PSI

• Flow rate: 3.5 GPM

Motor and Power

• Motor: 5.0 HP Baldor motor

• Phase: Three phase (as specified)

Pump

• Pump type: Commercial grade AR triplex pump

• Body: Reinforced body

• Manifold: Forged brass manifold

• Plungers: Solid ceramic plungers

• Check valves: Stainless steel check valves

• Protection: Thermal release valve

Burner and Heating System

• Fuel: Natural gas (plumbs into natural gas system)

• Gas valve: Robertshaw valve

• Heating coil: Heavy duty 1/2" schedule 80 carbon steel cold rolled pipe with stainless steel wrap

• Maximum temperature: Up to approximately 93°C / 200°F

• Control: Adjustable thermostat; burner can be turned off as needed

Controls and Protection

• Start/stop: Auto start/stop system activated by spray gun trigger

• Unloader: External unloader for enhanced cooling and versatility

Accessories

• High pressure hose: 50 ft high pressure hose

• Spray gun and wand: Industrial grade spray gun wand assembly

• Nozzles: Five spray nozzles (quick connect style)

Shipping and Dimensions

• Shipping weight: 665 lb

• Dimensions (L x W x H): 43 in x 20 in x 42 in

Additional Notes

• The actual product may vary from the images shown on the website