BE Power 2,000 PSI - 3.5 GPM Hot Water Electric Pressure Washer with Triplex Pump - HW205EBA

BE Power 2,000 PSI 3.5 GPM Hot Water Electric Pressure Washer – HW205EBA

The BE Power HW205EBA is a commercial grade 2,000 PSI, 3.5 GPM hot water electric pressure washer built for demanding cleaning jobs. A 5.0 HP TECHTOP electric motor, belt drive AR triplex pump, and diesel fired burner with up to 189,000 BTU combine to deliver powerful hot water cleaning for shops, fleets, facilities, and industrial environments.

The powder coated steel roll cage frame with four 13 inch tires, lift point, and compact footprint makes it suitable for both fixed installations and mobile use on trucks or trailers.

Electric-powered units are final sale (no returns/exchanges). We require this because electric motors and electronics are more sensitive, and a wrong voltage/phase/wiring setup can damage components quickly. Please confirm your electrical specs before ordering.
If the unit arrives with freight damage or a shipping-related issue, we will take care of it. We’ll also assist with manufacturer warranty claims for verified defects.

Key Features and Benefits

• 5.0 HP TECHTOP Electric Motor
  Commercial duty TECHTOP motor is designed for energy efficiency, reliability, and continuous use in professional applications.

• Belt Drive System
  Belt drive reduces pump RPM, heat, and vibration to help provide the longest possible pump life and smoother operation.

• Commercial Grade AR Triplex Pump
  AR triplex pump features a die cast body, forged brass manifold, ceramic coated plungers, and a thermal release valve. An external unloader helps improve cooling and versatility, further enhancing pump durability.

• Diesel Fueled Hot Water Burner
  Diesel fired burner can be switched on or off as needed. The thermostat can heat water up to approximately 89°C / 193°F with an output of 189,000 BTU for tough grease and oil removal.

• Heavy Duty Heating Coil
  Heating coil is wrapped in stainless steel to protect the heavy duty 1/2 inch schedule 80 carbon steel cold rolled pipe from damage.

• Commercial Grade Accessories Included
  Comes ready to work with a 50 ft high pressure hose, spray gun and wand assembly, and five spray nozzles for different spray patterns and detergent use.

• Powder Coated Steel Roll Cage Frame
  Strong steel frame with powder coat finish protects internal components. Roll cage design provides impact protection while keeping everything accessible for use and maintenance.

• Four 13 Inch Tires for Mobility
  Four 13 inch tires provide stability and allow the unit to handle rough or uneven terrain around shops, yards, and job sites.

• Integrated Lift Point
  Built in lift point on the frame allows safe lifting with a crane or hoist to load the unit onto a truck or trailer.

• Factory Variation Note
  The actual product may vary slightly from website images due to ongoing improvements.

Specifications

Performance

• Pressure: 2,000 PSI

• Flow rate: 3.5 GPM

Motor and Power

• Motor: 5.0 HP TECHTOP electric motor

Pump

• Pump type: Commercial grade AR triplex pump

• Body: Die cast

• Manifold: Forged brass

• Plungers: Ceramic coated

• Protection: Thermal release valve

• Unloader: External unloader for enhanced cooling and versatility

Burner and Heating

• Fuel: Diesel fueled burner

• BTU output: 189,000 BTU

• Maximum water temperature: up to approximately 89°C / 193°F (as specified by the manufacturer)

Heating Coil

• Coil protection: Stainless steel wrap

• Coil material: Heavy duty 1/2 inch schedule 80 carbon steel cold rolled pipe

Frame and Mobility

• Frame: Powder coated steel roll cage design

• Tires: Four 13 inch tires for stability and rough terrain

Dimensions and Shipping

• Shipping weight: 439 lb

• Dimensions (L x W x H): 43 in x 30 in x 37 in

Additional Notes

• The actual product may vary slightly from images shown on the website

A lift point is built into the frame to allow the use of a crane to lift it onto a truck or trailer.

The actual product may vary from the images shown on the website.

SHIPPING INFORMATION
WEIGHT: 439LBS
DIMENSIONS (LxWxH): 43"x30"x37"

Return, Refund, and Warranty Policy

OffGrid Lux follows and enforces the official BE Power Equipment Return, Refund, and Warranty Policy for all BE Power Equipment items purchased through OffGrid Lux. By purchasing a BE Power Equipment product from OffGrid Lux, you acknowledge that all return approvals, restocking fees, warranty evaluations, and remedies (repair, replacement, or credit) are governed by the BE Power Equipment policy below.

Return Authorization and Restocking Fee

All returns must be approved by the BE Power Equipment Returns Manager before being sent back. Unauthorized returns will not be eligible for credit. A 20% restocking fee applies to all approved returns.

Shipping Damage

If your item arrives damaged, the damage must be noted on the delivery receipt or the shipment must be refused as damaged. Failure to document damage at the time of delivery may result in the claim being denied. All damage and return authorizations must be approved by the BE Power Equipment Returns Manager before proceeding.

Return for Credit

This policy applies only to new items in original packaging. Items must be returned to BE Power Equipment for credit, and a Return Authorization must be obtained prior to shipping. Returns without authorization will not receive a credit.

• Shipping Costs: The sender is responsible for all return shipping costs.

• Restocking Fee: A 20% restocking fee applies to all approved returns.

• Used Items: Any items returned in used condition will not be credited.

• Custom Orders: Custom-ordered and custom-built products cannot be returned. No exceptions.

Warranty Procedure

To start a warranty claim, provide the following:

• Model/Part Number

• Serial Number (if applicable)

• Copy of Original Purchase Receipt

• Detailed Description of the Failure

• Any Additional Relevant Details or Photos

Warranty Coverage

BE Power Equipment guarantees to the original retail purchaser that new products are free from defects in materials and workmanship within the outlined warranty period. If a defect is found within this timeframe, BE Power Equipment may choose to repair, replace, or issue a credit for the product.

Warranty Limitations

• The warranty period begins on the date of purchase by the end user. A valid proof of purchase is required for warranty claims.

• Warranty covers defects from regular operational use and does not cover failures due to lack of maintenance, negligence, misuse, freezing damage, alterations, chemical deterioration, scale buildup, rust, thermal shock, thermal expansion, transportation damage, oil changes, valve adjustments, or fuel system issues.

• Using the wrong fuel, water, or power supply is considered misuse and is not covered.

• Normal wear items such as O-rings, valves, seals, filters, spark plugs, and packings are not covered under warranty. Regular maintenance is required for these parts.

Liability Disclaimer

BE Power Equipment disclaims all liability for injuries, property damage, incidental damages, rental loss, time loss, transportation costs, or consequential damages. It is the buyer’s responsibility to ensure proper installation, application, and usage of purchased products.

This policy is in lieu of all other warranties, express or implied, including fitness for a particular purpose. BE Power Equipment does not authorize any dealer, service center, or agent to modify the scope of this warranty in any way.