BE Power 2,500 PSI 3.5 GPM 5.0 HP Electric Hot Water Pressure Washer with Baldor Motor and AR Triplex Pump - HW255E1CNG

BE Power 2,500 PSI 3.5 GPM Electric Hot Water Pressure Washer – HW255E1CNG

The BE Power HW255E1CNG 2,500 PSI 3.5 GPM Electric Hot Water Pressure Washer is a natural gas fired, single phase unit designed for permanent installation in indoor wash bays, garages, and commercial facilities. A 5.0 HP single phase Baldor motor drives a commercial AR triplex pump, while a natural gas burner and heavy duty heating coil provide hot water up to 200°F (about 93°C) for effective degreasing and sanitation.

With an auto start/stop system, external unloader, and industrial grade accessories, this system is ideal for high-use environments that need reliable hot water cleaning every day.

Key Features & Benefits

• 5.0 HP Single Phase Baldor Motor
  Single phase Baldor motor delivers energy efficient, reliable power for commercial duty wash bays and indoor cleaning applications.

• Natural Gas Fired Heating System
  Plumbs directly into a natural gas system using a Robertshaw valve, making it well suited for fixed indoor installations where gas service is already available.

• Commercial AR Triplex Pump
  AR triplex pump features a reinforced body, forged brass manifold, solid ceramic plungers, stainless steel check valves, and a thermal release valve for durability in hot water operation.

• Auto Start/Stop Operation
  Auto start/stop system activates the pump when the spray wand trigger is squeezed and stops it when released, helping reduce wear, energy use, and noise between cleaning cycles.

• External Unloader for Cooling and Versatility
  External unloader provides superior cooling and flexible pressure adjustment, which helps extend pump life under continuous or frequent use.

• Heavy Duty Heating Coil Assembly
  Heating coil is built from heavy duty 1/2 inch schedule 80 carbon steel cold rolled pipe, wrapped in stainless steel for added protection and corrosion resistance.

• Adjustable Thermostat and Burner Control
  Burner can be switched off when hot water is not required and controlled by an adjustable thermostat that can be set up to 93°C / 200°F for different cleaning and sanitation tasks.

• Industrial Accessories Included
  Includes a 50 foot high pressure hose, spray gun and wand assembly, and five spray nozzles so the system is ready for use once installed and connected.

• Ideal for Indoor Wash Bays and Garages
  Designed as a stationary natural gas hot water pressure washer for commercial facilities that need consistent, controlled hot water cleaning.

Specifications

Performance

• Pressure: 2,500 PSI

• Flow rate: 3.5 GPM

Motor and Power

• Motor: 5.0 HP Baldor motor

• Phase: Single phase

Pump

• Type: Commercial grade AR triplex pump

• Body: Reinforced body

• Manifold: Forged brass manifold

• Plungers: Solid ceramic plungers

• Check valves: Stainless steel check valves

• Protection: Thermal release valve

Burner and Heating System

• Fuel: Natural gas (plumbs into natural gas system)

• Gas valve: Robertshaw valve

• Heating coil: Heavy duty 1/2" schedule 80 carbon steel cold rolled pipe with stainless steel wrap

• Maximum temperature: Up to approximately 93°C / 200°F

• Control: Adjustable thermostat; burner can be turned off when hot water is not needed

Controls and Protection

• Start/stop: Auto start/stop system activated by spray wand trigger

• Unloader: External unloader for superior cooling and versatility

Accessories

• High pressure hose: 50 ft high pressure hose

• Spray gun and wand: Industrial grade spray gun wand assembly

• Nozzles: Five spray nozzles (quick connect style)

Shipping and Dimensions

• Shipping weight: 665 lb

• Dimensions (L x W x H): 43 in x 20 in x 42 in

Additional Notes

• Actual product may vary from images shown on the website