BE Power 4,000 PSI 4.0 GPM Hot Water Pressure Washer – HW4013HG
The BE Power HW4013HG 4,000 PSI 4.0 GPM Hot Water Pressure Washer is built for heavy commercial cleaning where cold water is not enough. Powered by a Honda GX390 electric start engine and a General ZWD triplex pump, it delivers a strong 4,000 PSI at 4.0 GPM to cut through grease, oil, and stubborn industrial grime.
A diesel fired 12V Beckett burner and heavy duty heating coil provide up to 330,000 BTU of heat, raising water temperature to 200°F (93°C) for maximum cleaning efficiency. Mounted on a powder coated roll cage frame with flat free tires and truck or trailer mounting options, the HW4013HG is ready for demanding industrial, agricultural, and commercial jobsites.
Hot Water Performance Built for the Toughest Jobs
When high-pressure cold water isn’t enough, the BE Power Equipment HW4013HG steps up with high heat and serious cleaning muscle. Engineered for commercial-grade applications, this hot water pressure washer is designed to melt through grease, oil, and heavy grime where traditional pressure washers fall short. Powered by a Honda GX390 electric start engine and paired with a General triplex pump, this unit pushes out 4,000 PSI at 4.0 GPM—making it the ultimate solution for demanding industrial, agricultural, and commercial cleaning tasks.
Equipped with a 12V diesel-fired Beckett burner, a heavy-duty steel frame, and premium accessories, the HW4013HG is ready to take on your dirtiest jobs with professional-grade durability, power, and performance.
Clean Better with Hot Water Power
The real power of the HW4013HG lies in its ability to deliver scalding hot water up to 200°F (93°C)—enough to break down oil, grease, and chemical residues that cold water can’t touch. The diesel-fired 12V Beckett burner ignites a heavy-duty heating coil, delivering an incredible 330,000 BTUs of cleaning heat.
The adjustable thermostat puts you in control of your temperature settings, while the burner control rocker switch allows you to toggle hot water on or off instantly. This flexibility allows you to use the HW4013HG as both a hot and cold water washer—doubling its value on a wide range of job types.
Professional-Grade Honda GX390 Engine with Electric Start
At the heart of this hot water pressure washer is the Honda GX390 389cc engine, a cornerstone of commercial power equipment. Designed for reliability and longevity, it features OHV technology, a cast iron cylinder sleeve, low oil shutdown, and a quiet-yet-powerful operation.
The electric start feature eliminates the hassle of manual pull cords—especially important in cold weather or extended jobsite conditions. A 55AH marine-grade AGM battery is included, delivering long-lasting performance in rugged outdoor environments. Honda’s reputation for dependability makes this engine an ideal choice for anyone who needs a washer that starts easily and runs hard all day.
Direct Drive Power Transfer
The direct drive system offers a more compact and efficient power connection between the engine and the pump. With fewer moving parts than belt-driven systems, this configuration reduces maintenance and increases overall power transfer—while keeping the machine footprint tight for transport and storage.
General Triplex Pump: Built for Daily Demands
Matched with the Honda engine is a General ZWD triplex pump, one of the most trusted names in high-performance industrial pumps. Designed for extended use, high heat, and demanding pressure, this commercial-grade pump includes:
-
Die-cast body for structural strength
-
Forged brass manifold for corrosion resistance
-
One-piece plungers for durability and longevity
-
Thermal relief valve to prevent overheating
-
Improved heat dissipation for better performance in high-temperature environments
This pump is built to thrive under pressure—literally. It’s supported by an external unloader, which not only extends pump life by reducing stress and heat, but also adds greater flexibility and serviceability for professionals in the field.
Heavy-Duty Roll Cage Frame with Field-Ready Design
The HW4013HG is framed by a powder-coated steel chassis, designed to handle rough terrain, long workdays, and harsh conditions. A roll cage design protects the core components—engine, pump, and burner—while offering easy access for service, fueling, or maintenance.
Mounted on four 13-inch flat-free tires, the unit moves smoothly across gravel, dirt, grass, or pavement. Whether on a jobsite or in a remote field, the wheels ensure excellent mobility without the risk of downtime due to punctures.
The frame also includes built-in mounting brackets for truck or trailer installations. Simply remove the wheels and bolt it down for a more permanent setup. A central lift point is also integrated into the design, making it easy to crane-lift the unit onto service vehicles or loading docks.
Premium Commercial Accessories Included
No corners are cut when it comes to accessories. Every HW4013HG unit comes equipped with a full set of high-quality tools so you can get to work immediately:
-
50-ft high-pressure hose: Double-braided steel wire for durability and hot water compatibility
-
36” insulated spray gun/wand assembly: Ergonomically designed and heat resistant for extended use
-
5 quick-connect nozzles: Easily switch between 0°, 15°, 25°, 40°, and soap for precision cleaning tasks
Every component is designed to handle both high PSI and high heat without sacrificing user comfort or control.
The Right Tool for Demanding Jobs
The HW4013HG is a professional-grade solution for situations where standard cold water pressure washers just don’t cut it. From caked-on grease to chemical spills, this hot water washer is trusted by:
-
Fleet and transportation professionals for cleaning engines, trailers, and undercarriages
-
Construction crews for removing concrete splatter, mud, and oil from equipment
-
Agricultural operations for sanitizing livestock pens and tractors
-
Facility maintenance teams for degreasing floors and machinery
-
Municipal and sanitation crews for street cleaning, utility cleanup, and graffiti removal
Specifications
Performance
-
Pressure: 4,000 PSI
-
Flow rate: 4.0 GPM
Engine and Power
Pump
-
Pump type: General ZWD triplex pump
-
Body: Die cast construction
-
Manifold: Forged brass
-
Plunger design: One piece plungers
-
Protection: Thermal relief valve
-
Unloader: External unloader for improved cooling and pump life
Burner and Heating
-
Burner type: Diesel fired 12V Beckett burner
-
BTU output: 330,000 BTU
-
Maximum water temperature: 200°F / 93°C
-
Thermostat: Adjustable, with rocker switch burner control
Hose and Spray System
-
Hose: 50 ft steel braided high pressure hose, quick connect
-
Spray wand: 36 inch insulated gun and wand assembly
-
Nozzles: 5 quick connect tips
Frame and Mobility
Dimensions and Weight
Additional Notes
