Chery Industrial Single Truss Storage Shelter W20'xL40'xH12'
The Chery Industrial Single Truss Storage Shelter W20'xL40'xH12' is a reliable and spacious outdoor storage solution built to protect equipment, vehicles, tools, and materials from rain, sun, snow, and wind. With an 800 sq ft coverage area and a sturdy single truss galvanized steel frame, this shelter delivers dependable performance for residential, agricultural, and industrial uses. Its heavy‑duty 15 oz PVC canopy enhances durability and weather resistance, allowing long‑term protection in diverse outdoor conditions.
Designed with convenience and functionality in mind, this storage shelter features large zipper roll‑up doors on both the front and rear, enabling easy access and drive‑through capability for vehicles and machinery. The peak roof design helps snow and debris slide off, reducing buildup and structural stress. Built‑in top end vents promote improved airflow, minimizing interior moisture and creating a healthier storage environment for your belongings.
Installation is flexible and efficient since the shelter can be set up without a permanent foundation using stake pegs, making it ideal for temporary or semi‑permanent needs. Whether you’re storing farming equipment, construction supplies, recreational vehicles, or event gear, this shelter combines durability with adaptable design to meet evolving storage demands.
Features
- No building permits required*.
- Ideal for agriculture, farms, events, film sets, garages, and automobile storage.
- The galvanized steel structure is built to last, which is resistant to rusting and corrosion.
- Weatherproof (snow, storm, wind, water), UV resistance, and fire retardant.
- The PVC provides bright natural light, which helps to save on utility bills.
- Easy entry and exit with double doors placed at both ends.
- The quality of the structure is designed by experienced engineers and advanced technology.
- Easy to install or dismantle and transport to the new locations.
Please Note: Stake pegs are replaced by expansion bolts. If you need stake pegs, you can contact customer service to place an order.
Specifications
| Description |
Specifications
|
| Dimensions (WxLxH)
|
20'x40'x12' |
| Side-wall Height |
6.56 ft |
| Door size (WxH) (Front & Rear) |
14.4'x10.8' |
| Door Type |
Zipper Rollup Door |
| Frame |
Single Truss Galvanized Tube |
| Steel Frame |
Hot Dip Galvanized Steel |
| Truss tube |
16 Gauge |
| Tarp Fabric |
PE or PVC |
| Tarp Color (customizable) |
White with Green/Red Edge |
| Temperature resistance |
-22 - +158 °F |
| Arch Ø |
Ф 70x42x1.5mm |
| Purlin Ø |
Φ 40x1.2mm |
| Arch Spacing |
5 ft |
| Number of Arch |
9 |
| Number of Anchor plates |
18 |
| Tension System |
Pipe and Ratchet Tie-Down System |
| Average assembly time for DIY with 4 persons |
2 Days |
| Snow Load |
42 lbs/ft² |
| Wind Load |
50 miles/h |
| Tarp lifespan |
7-10 years, depending on the type of fabric and environmental conditions. |
|
Frame lifespan
|
15+ Years |
|
Warranty
|
- PE: 2 Years Warranty.
- PVC: 8 Years Warranty. |
|
Fabric (Optional)
|
- Economical - 11oz/m²(300 gsm) PE Tarpaulin Fabric
- Heavy Duty - 16oz/m²(450 gsm) PVC Tarpaulin Fabric
- Heavy Duty - 23oz/m²(650 gsm) PVC Tarpaulin Fabric
- Heavy Duty - 26oz/m²(750 gsm) PVC Tarpaulin Fabric
- Heavy Duty - 32oz/m²(900 gsm) PVC Tarpaulin Fabric
- Please contact us to order.
|
| Country of Origin |
China |
Installation Tips
1. That depends on the product and the local regulations. A permit is usually not necessary for temporary placement. For (semi) permanent placements, it’s best to contact your municipality.
2. It’s necessary to tighten the roof fabric enough to avoid “hammocks” on the roof and also re-tighten once or twice again after a few months of use. This is important when assembly in cold weather (autumn and winter) because the fabric is stiff then and when we get the sun and warm weather afterward it will make the fabric “slack” again and need to be re-tightened before next winter.
Package Size
- LxWxH (inch): 85x30x26
- Weight (lb): 2310
- A forklift or equivalent is required for unloading.
Delivery and Unloading
- The product will be either loaded onto a box or flatbed truck, depending on its size.
- A forklift or equivalent is required for unloading.
